東京大学生産技術研究所　長谷川研究室

経歴

2009年 9月-2013年 6月

BS, Theoretical and Applied Mechanics, Lanzhou University, <China>

2013年 9月-2021年 4月

Ph.D, Naval Architecture and Ocean Engineering, Shanghai Jiao Tong University, <China>

2016年 4月- 2019年3月

Ph.D, Mechanical Engineering, Chiba University, <Japan>

2019年 4月- 2021年3月

Postdoctoral researcher, Department of Information and Computer Technology, Faculty of Engineering, Tokyo University of Science, <Japan>

研究テーマ

• Topology optimization, optimal structure of heat transfer, adjoint method, plasma-assisted flow control, low-Reynolds-number aerodynamics, insect flight, bio-inspired rotary machinery

学術論文（英文）

Chen, D., Kumar, P., Kametani, Y., Hasegawa, Y., “Multi-objective topology optimization of heat transfer surface using level-set method and adaptive mesh refinement in OpenFOAM”, International Journal of Heat and Mass Transfer, accepted. (preprint: https://arxiv.org/abs/2309.06016)

Kumar, P., Kumar, V., Chen, D., Hasegawa, Y., “Implementation of a level-set based volume penalization method for solving fluid flows around bluff bodies in OpenFOAM” submitted. (preprint: 10.48550/arXiv.2309.08882)

Chen, D., Asada, K., Sekimoto, S., Fujii, K., & Nishida, H.
“A high-fidelity body-force modeling approach for plasma-based flow control simulations.”
Physics of Fluids, 33(3), 037115. (2021)

Chen, D., Kolomenskiy, D., Onishi, R., & Liu, H.
“Versatile reduced-order model of leading-edge vortices on rotary wings.”
Physical Review Fluids, 3(11), 114703. (IF = 2.442) (2018)

Chen, D., Kolomenskiy, D., & Liu, H.
“Closed-form solution for the edge vortex of a revolving plate.”
Journal of Fluid Mechanics, 821, 200-218. (IF = 2.821) (2017)

Chen, D., Kolomenskiy, D., Nakata, T., & Liu, H.
“Forewings match the formation of leading-edge vortices and dominate aerodynamic force production in revolving insect wings.”
Bioinspiration & biomimetics, 13(1), 016009. (IF = 2.939) (2017)

Ogawa, T., Shimomura, S., Asada, K., Sekimoto, S., Chen, D., Tatsukawa, T., Nishida, H., Fujii, K.
“Feed-back Control of Separated Flow over an NACA0015 with DBD Plasma Actuator.”
AIAA journal (under review) (2020)

Wang, H., Li, Y., Pröbsting, S., Zheng, X., Hu, Q., Chen, D., ... & Wu, X.
“Aerodynamics of the Wells turbine with a Hawkmoth-inspired blade design.”
Bioinspiration & Biomimetics, 15(6), 066001. (2020)

Noda, R., Nakata, T., Ikeda, T., Chen, D., Yoshinaga, Y., Ishibashi, K., ... & Liu, H.
“Development of Bio-Inspired Low-Noise Propeller for a Drone.”
Journal of Robotics and Mechatronics, 30(3), 337-343. (2018)

GUO, X., CHEN, D. and LIU, H.
“Does a revolving wing stall at low Reynolds numbers?”
Journal of Biomechanical Science and Engineering, 10(4), pp.15-00588-15-00588. (2015)