東京大学生産技術研究所 長谷川研究室

亀谷 幸憲

     

Profile

亀谷 写真

亀谷 幸憲(カメタニ ユキノリ), 博士(工学)

東京大学 生産技術研究所
特任助教

居室: 駒場キャンパス 生産技術研究所 De棟201号室
電話&FAX: 03-5452-6171 (内線: 56171)
E-mail: yukkam [at] iis.u-tokyo.ac.jp

English page is here

経歴

2013年 3月
慶應義塾大学 大学院理工学研究科 開放環境科学専攻 博士課程修了
2013年 4月 - 2014年 3月
JSPS特別研究員(慶應義塾大学ポストドクター)
2014年 4月 - 2015年 3月
Postdoctoral Fellow(KTH Royal Institute of Technology, Stockholm)
2015年 4月 - 2018年 3月
東京大学 生産技術研究所 特任研究員
2018年 4月-
東京大学 生産技術研究所 特任助教

所属学会

研究テーマ

  • 乱流熱流体連成場における複雑伝熱面の形状最適化
  • 環境負荷の少ない航空機・交通車輌を目指した空間発達乱流境界層の摩擦抵抗低減制御
  • 低温熱源を用いた発電サイクルのための熱交換器の性能向上

外部資金研究

  • 平成29-30年度,文部科学省科学研究費補助金 若手研究(B),研究代表者
    「非定常流れにおける三次元伝熱面形状最適化アルゴリズムの構築と実証」
  • 平成24-25年度,日本学術振興会 特別研究員
    「高速車両及び超音速機の環境負荷軽減を目指した空間発達乱流境界層の摩擦抵抗低減制御」

受賞

  • 平成27年 日本機械学会研究奨励賞
    「一様吹出しを用いた空間発達乱流境界層の摩擦抵抗低減に関する数値的・理論的研究 」
  • 平成25年 日本自動車技術会 大学院研究奨励賞
    「空間発達乱流境界層の摩擦抵抗低減制御」

学術論文(英文)

K. Kaneko, T. Osawa, Y. Kametani, Y. Hasegawa, and H. Suzuki,
"Numerical and experimental analyses of three-dimensional unsteady flow around a micro-pillar subjected to rotational vibration,"
Micromachines 9, 668 (2018).

Y. Kametani, A. Kotake, K. Fukagata, and N. Tokugawa,
"Drag reduction capability of uniform blowing in supersonic wall-bounded turbulent flows,"
Phyis. Rev. Fluids 2, 123904 (2017).

Y. Kametani, K. Fukagata, R. Örlü, and P. Schlatter,
"Drag reduction in spatially developing turbulent boundary layers by spatially intermittent blowing at constant mass-flux,"
J. Turbulence 17, 913-929 (2016).

Y. Kametani, K. Fukagata, R. Örlü, and P. Schlatter,
"Effect of uniform blowing/suction in a turbulent boundary layer at moderate Reynolds number,"
Int. J. Heat Fluid Flow 55, 132-142 (2015).

Y. Kametani, M. Kawagoe, and K. Fukagata,
"Direct numerical simulation of a turbulent mixing layer with a perpendicularly oscillated inflow,"
J. Fluid Sci. Technol 10, JFST0004 (2015).

Y. Kametani and K. Fukagata,
"Direct numerical simulation of spatially developing turbulent boundary layer for skin friction drag reduction by wall surface-heating or cooling,"
J. Turbulence 13, N34, 1-20 (2012).

Y. Kametani and K. Fukagata,
"Direct numerical simulation of spatially developing turbulent boundary layer with uniform blowing or suction,"
J. Fluid Mech. 681, 154-172 (2011).

Y. Naka, K. Tsuboi, Y. Kametani, K. Fukagata, and S. Obi,
"Near-field development of a turbulent mixing layer periodically forced by a bimorph PVDF film actuator,"
J. Fluid Sci. Technol 5, 156-168 (2010).

講演論文(国際会議)

Y. Kametani and Y. Hasegawa,
"Adoint-based shape optimization of heat transfer surface in turbulent flows with DNS-based eddy viscosity and diffusivity,"
68th Annual Meeting of the APS Division of Fluid Dynamics,
Denver, U.S., Nov. 19-21, 2017.

Kametani, Y., Hasegawa, Y.,
"Shape optimization of three-dimensional solid-fluid interface for conjugate heat transfer,"
9th JSME-KSME Thermal and Fluids Engineering Conference (TFEC9),
Okinawa, Japan, Oct. 28-30 2017.

Kametani, Y., Hasegawa, Y.,
"Optimal control input for friction drag reduction in turbulent channel flow,"
24th International Congress of Theoretical and Applied Mathematics (ICTAM2016),
Montreal, Canada, Aug. 21-16 2016.

Y. Kametani, K. Fukagata, R. Örlü, and P. Schlatter,
"Direct numerical simulation of a compressible turbulent channel flow with uniform blowing and suction through isothermal walls,"
67th Annual Meeting of the APS Division of Fluid Dynamics,
San Francisco, Nov. 23-25, 2015.

Y. Kametani, K. Fukagata, R. Örlü, and P. Schlatter,
"Drag reduction in spatially developing turbulent boundary layers by blowing at constant mass-flux,"
9th Int. Symp. on Turbulence and Shear Flow Phenomena (TSFP-9),
Melbourne, June 30-July 3, 2015.

Y. Kametani and K. Fukagata,
"Direct numerical simulation of a compressible turbulent channel flow with uniform blowing and suction through isothermal walls,"
67th Annual Meeting of the APS Division of Fluid Dynamics,
San Francisco, Nov. 23-25, 2014.

Y. Kametani, K. Fukagata, R. Örlü, and P. Schlatter,
"Drag reduction in turbulent boundary layers: effect of uniform blowing and suction,"
10th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements (ETMM10),
Marbella, Spain, Sept. 17-19, 2014.

Y. Kametani, R. Örlü, P. Schlatter, and K. Fukagata,
"Friction reduction in spatially evolving turbulent boundary layers: Effects of uniform blowing and suction,"
IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows,
Goa, India, Dec. 15-18, 2014.

Y. Kametani, M. Kawagoe, and K. Fukagata,
"Direct numerical simulation of turbulent mixing layer with transversely oscillating inflow,"
8th International Symposium on Turbulence and Shear Flow Phenomena,
August 28-30, 2013, Poitiers, France.

Y. Kametani and K. Fukagata,
"Direct numerical simulation of spatially developing supersonic boundary layer for skin friction drag reduction,"
9th Int. ERCOFTAC Symp. on Engineering Turbulence Modeling and Measurements (ETMM9),
Thessaloniki, June 6-8, 2012, Paper No. 0121, 6 pp.

Y. Kametani and K. Fukagata,
"Direct numerical simulation of spatially developing turbulent boundary layer for skin friction drag reduction by wall surface-heating or cooling,"
Proc. 7th Int. Symp. on Turbulence and Shear Flow Phenomena (TSFP-7),
Ottawa, July 28-31, 2011, Paper 7C1P, 5 pp.

Y. Kametani and K. Fukagata,
"Numerical simulation of friction drag reduction control in spatially developing boundary layer,"
Proc. 8th EUROMECH Fluid Mechanics Conf.,
Bad Reichenhall, Germany, September 13-16, 2010, Paper S4-24, 1 p.

Y. Kametani, K. Fukagata, and S. Obi,
"Direct numerical simulation of traveling wave control in spatially developing turbulent boundary layers,"
Proc. The Asian Symposium on Computational Heat Transfer and Fluid Flow (ASCHT09),
Jeju, Oct. 20-22, 2009, Vol. II, pp. 140-145.

R. Kidogawa , Y. Kametani, and K. Fukagata,
"Detached eddy simulation of a high Reynolds number turbulent boundary layer with uniform blowing,"
10th European Fluid Mechanics Conference (EFMC10),
Copenhagen, Sept. 14-18, 2014.

A. Kotake, Y. Kametani, and K. Fukagata,
"Mach number dependency of drag reduction effect by a uniform blowing in a supersonic turbulent channel flow,"
10th European Fluid Mechanics Conference (EFMC10),
Copenhagen, Sept. 14-18, 2014.

R. Kidogawa , Y. Kametani, and K. Fukagata,
"Detached eddy simulation of spatially developing turbulent boundary layer at high Reynolds number with uniform blowing,"
10th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements (ETMM10),
Marbella, Spain, Sept. 17-19, 2014

A. Kotake, Y. Kametani, and K. Fukagata,
"Direct numerical simulation of supersonic turbulent channel flow with uniform blowing and suction from walls,"
The 4th Asian Symposium on Computational Heat Transfer and Fluid Flow,
Hong Kong, June 3-6, 2013.

A. Kotake, Y. Kametani, and K. Fukagata,
"Direct numerical simulation of supersonic turbulent channel flow with uniform blowing and suction,"
International Computational Mechanics Symposium 2012 (ICMS2012),
Kobe, Oct. 9-11, 2012, Paper MS6-2-2(19), 2 pp.